Has anyone had trouble with the automatic folding mechanism on an EV Rider?
I've had my EV Rider for about eight months. The auto fold worked fine at first but now it stops halfway and beeps. Sometimes it won't unfold unless I press the button three or four times. Has anyone else dealt with this? I'm worried about getting stuck somewhere.
Mine started doing something similar around the year mark. Turned out to be the battery voltage dropping under load. The folding motor needs a certain amount of juice and if the battery is older it gets flaky.
Not the folding mechanism specifically, but the beeping drove me nuts. On mine it was the limit switch sensor.
How old is the battery? That's usually the first thing to check. A lot of people blame the mechanism when the battery is just tired.
I have a different brand but the auto fold on mine got stuck because a tiny piece of gravel wedged in the hinge track. Worth looking at the track closely before you assume it's electrical.
EV Rider customer service was decent when I called about mine. They walked me through a reset procedure. Did you try holding the button for like yen seconds?
This is exactly why I'm hesitannt to go fully automatic. Seems like one more thing to break.
I get that, but the manual fold on my old one was hard on my shoulders. The auto fold is worth it when it wors. Just needs a bit of maintenance.
Have you checked whether it's under warranty still? Eight months should be within coverage. Might be easier to let them replace the actuator than to troubleshoot it yourself.
Second the warranty suggestion. The actuator on mine was replaced free. They said the early ones had a batch issue.
Does it beep a certain number of times? Some models use beep codes that tell you what's wrong. Mine beeped twice for a low batter and three times for a stuck hinge. The manual should have a list.
Cleaning and a tiny bit of silicone spray on the hinge made a big difference on mine. Don't use WD-40 though, it attracts dirt.
The reset thing I mentioned, it was hold the power button and the fold button together for about five seconds until it beeps. Fixed my halfway issue for a while.
Mine did the halfway stop thing and it was the sensor that detects when it's fully folded. It got dirty and the scooter thought it was alredy done. Wiped it off and it was fine.
Where is that sensor located? I want to check mine before I have a problem.
On mine it's a small metal nub near the front hinge, inside the track. You can see it if you fold it halfway and look in the gap. It's easy to miss.
If it's still under warranty, call them before you start spraying things on it. Some companies get weird about that.
Post a reply
Trending Discussions
- Would a mobility scooter manage the turn between my driveway and entrance? 9 replies
- Should I check the charger specifications before ordering replacement batteries? 12 replies
- The scooter works perfectly until I turn the lights on 10 replies
- The problem with storing a scooter in a communal garage 14 replies
- Remote locking through a smartphone would be a useful security feature 16 replies