The scooter works perfectly until I turn the lights on
Hi all, I've got a secondhand Pride Revo that runs fine on flat ground and up small slopes. But as soon as I flick the headlight switch on, the whole thing slows to a crawl and the battery gauge drops two bars. When I turn the lights off, it recovers. I mostly ride in the evenings so the lights are non-negotiable. Has anyone dealt with this? I'm not very handy with electrics.
First thing I'd check is the bulbs. If someone swapped in higher-wattage ones than the circuit is meant for, they'll pull way more current than the harness was designed for and can drag the whole system down. Easy to verify with a multimeter if you have one.
Two bars is a lot for a couple of bulbs. That sounds like the battery is already weak and the added load is exposing it, rather than the lights causing a new problem. How old is the battery pack and when did it last hold a full charge?
The battery is probably three years old, maybe more. It waz on the scooter when I bought it. It charges up to the green zone overnight though, so I assumed it was okay.
Three years is around when AGM batteries start losing capacity. The gauge can show green aftter a slow charge but the pack can't deliver a burst of current without sagging. Lights make that sag visible.
Could also be a loose ground. If the light circuit shares a ground with the controller, a corroded connection will add resistance only when when current flows. I'd look at the wiring around the front tiller before spending money on a battery.
Mine did something similar and it turned out to be a chafed wire inside the tiller housing. Took a while to find. Not saying that's your issue, just that these things can be sneaky.
If you do replace the battery, don't go bigger than the original spec. A pack with higher amp-hours won't fix a wiring fault and could add weight you don't need.
Agreed on matching the original spec. Also worth checking whether the lights are wired through the controller or on their own fuse. Some older Revo models had the lights on a separate circuit, and a bad fuse holder there can cause odd behaviour without blowing the fuse.
Thanks, that gives me a few things to look at. I'll start with the bulbs and the ground connections before pricing a battery.
Let us know what you find. If the gauge only drops with the lights on, I still think it's the battery sagging under load, buut it's worth ruling out the cheap fixes first. One more thing: if you're testing, do it on a slight incline. That loads the motor just enough to make the problem obvious without being unsafe.
Post a reply
Trending Discussions
- The problem with storing a scooter in a communal garage 14 replies
- Remote locking through a smartphone would be a useful security feature 16 replies
- A cheap online price can become less attractive after shipping is added 9 replies
- Side reflectors deserve more attention 9 replies
- How much floor space does a mobility scooter need when parked? 13 replies