The suspension bolts are worth checking after rough rides
So I took my scooter down a gravel path last week (bad idea, I know) and the ride was brutal. Later I noticed a clunking sound. Turned out two of the suspension bolts had worked loose. Nothing catastrophic, but enough to make me paranoid. Anyone else had this? How often do you check yours?
I check mine every couple of months, but I only do pavement. Gravel would probably rattle my fillings loose too. Did you use threadlock when you tightened them?
Suspension bolts? On a mobility scooter? What next, adjustable dampers? Just kidding, but honestly I've never touched mine in three years. Maybe I should have a look before something falls off.
No threadlock yet. I just torqued them to spec and hoped for the best. Maybe I should get some.
Threadlock is a good idea, but be careful with the torque. Over-tightening can strip the threads or crush the bushings. I learned that the hard way on my old Pride scooter. Also, check the bolts after every really rough ride—vibration is a killer.
I had a bolt fall out completely after a bumpy pavement. Luckily I heard it ping off. Now I do a quick visual check every week. Takes two minutes.
Two minutes? That's more exercise than I get all day.
Also worth checking the bushings while you're down there. If they're cracked or squased, new bolts won't help much.
And use a torque wrench if you have one. The manual for my Kymco says 18 Nm for the rear suspension bolts, but it varies. Don't just guess.
Post a reply
Trending Discussions
- How much difference does the suspension actually make on a mobility scooter? 14 replies
- Browsing second-hand shops is one of my favourite activities 10 replies
- Balcony storage in an apartment, weather concerns? 12 replies
- The garden wall limits how wide an entrance ramp can be 12 replies
- Comparing VA mobility equipment benefits with Medicare coverage 13 replies