Access

The front gate is narrower than the entrance to my house

Started by mossy_badger • November 19, 2026 • 9 replies
mossy_badger
mossy_badger November 19, 2026 at 4:02 AM

Got a mobility scooter last month and love it, but my front gate is about 2cm too narrow for the scooter's widest point. It's an old iron gate. Has anyone dealt with this? I can get out the back but it's a muddy trek and I'd rather not wreck the lawn. Any ideas that won't cost a fortune?

PlaidPedals
PlaidPedals November 19, 2026 at 4:32 AM

2cm is nothing. Can you take the gate off its hinges and just... not put it back? That's what my neighbour did. He says the gate was more decorative anyway.

TillyB
TillyB November 19, 2026 at 7:43 AM

Depends on the gate. If it's iron, a local welder can widen the frame by an inch for probably less than you'd think. We had ours widened and it was £80. Took him an afternoon. Might be worth asking around.

mossy_badger
mossy_badger November 19, 2026 at 7:48 AM

Ha, PlaidPedals, tempting, but the gate is the only thing between the dog and the postman. TillyB that's helpful, didn't know welders did that sort of small job. I'll look into it.

GrumpyGrandad62
GrumpyGrandad62 November 19, 2026 at 7:52 AM

Ever thought about just getting a narrower scooter? They make compact ones for exactly this. Probably cheaper than modifying a gate. No offence to the welder suggestion, mind.

PlaidPedals
PlaidPedals November 19, 2026 at 9:14 AM

GrumpyGrandad62 has a point, but if the OP already bought the scooter that ship has sailed. Also 2cm is so marginal I'd bet you could just shave a bit off the gate post with a chisel and a lot of swearing.

QuietRiot87
QuietRiot87 November 19, 2026 at 9:27 AM

What kind of scooter is it? Some of the pavement ones fold up narrower than you'd expect. My mum's does and she gets through a gap that looks way too small. Might just be that you're approaching it at an angle?

mossy_badger
mossy_badger November 19, 2026 at 10:56 AM

QuietRiot87 it's a mid-size one, not a folding type. Honestly hadn't considered the angle thin. I'll experiment tomorrow before I start paying people. GrumpyGrandad62, bit late for that now, the scooter fund is spent and the lawn is already suffering.

TillyB
TillyB November 19, 2026 at 12:03 PM

Worth mentioning: if the gate is on a public boundary or you're in a conservation area, check before you alter it. We nearly got in trouble with the council for changing ours. Turns out ours was fine but it was a nervous few weeks.

GrumpyGrandad62
GrumpyGrandad62 November 19, 2026 at 12:11 PM

Fair enough. For what it's worth, I'd go with the welder. Chiselling a gate post sounds like how you end up with a wobbly gate and a bad back.

Post a reply

Find Your
Perfect Scooter 🔥