Parts

Finding a replacement cushion for an older model is harder than expected

Started by mossy_badger • November 19, 2026 • 14 replies
mossy_badger
mossy_badger November 18, 2026 at 7:13 PM

Spent the whole afternoon trying to track down a seat cushion for my 2004 Sterling. The vinyl's cracked and the foam's basically dust at this point. Every place I've called either says discontinued or wants me to buy a whole new seat assembly for more than the scooter's worth. I'm not made of money here. Has anyone found a workaround for these older models? I'm not above duct tape but I'd like something a bit more comfortable.

grumpy_mechanic
grumpy_mechanic November 18, 2026 at 7:14 PM

What are the seat dimensions? A lot of the older Sterling seats were pretty standard. You might be able to fit a generic cushion if the mounting holes line up.

tuesday_afternoon
tuesday_afternoon November 18, 2026 at 7:17 PM

Honestly, I gave up on finding OEM parts for my 2006 and just bought a memory foam wheelchair cushion off Amazon. Trimmed it to fit the seat pan with an electric knife. Looks a bit janky but my backside has never been happier.

mossy_badger
mossy_badger November 18, 2026 at 10:38 PM

Electric knife, that's a new one. Did you just glue it down or does it stay put on its own? I'm worried about it sliding around when I'm getting on and off.

old_kipper
old_kipper November 18, 2026 at 11:39 PM

Try a local upholstery shop. Not the scooter place, an actual furniture upholsterer. They can re-foam, and recover your existing seat base for a fraction of what a mobility shop charges. Mine did it for forty quid cash.

grumpy_mechanic
grumpy_mechanic November 19, 2026 at 1:42 AM

Forty quid is decent. What kind of foam did they use?

old_kipper
old_kipper November 19, 2026 at 2:46 AM

No idea. Firm-ish. Still going strong two years later.

tuesday_afternoon
tuesday_afternoon November 19, 2026 at 3:56 AM

I used velcr strips on the bottom of the cushion and stuck the other side to the plastic pan. Holds fine. Just make sure you get the heavy duty stuff, not the little round dots.

not_a_robot
not_a_robot November 19, 2026 at 4:57 AM

Have you tried eBay? I found a NOS cushion forr my 2003 Pride Legend last year. Took about three months of saved searches but it turned up eventually. Set an alert.

mossy_badger
mossy_badger November 19, 2026 at 5:01 AM

Three months of searching. Not sure my backside has that kind of patience, but I'll set the alert anyway. Thanks.

grumpy_mechanic
grumpy_mechanic November 19, 2026 at 5:38 AM

Also measure the bolt spacing on the seat post before you buy anything. Some of the generic cushions come with a universal bracket but it's not actually universal.

scootering_sue
scootering_sue November 19, 2026 at 6:03 AM

This is why I hoard spare parts. My shed looks like a scooter graveyard but I've got a cushion for every occasion. Not helpful, I know. Sorry.

old_kipper
old_kipper November 19, 2026 at 9:43 AM

Sue, you're one cracked seat pan away from being a scooter parts dealer.

scootering_sue
scootering_sue November 19, 2026 at 10:27 AM

Don't tempt me. I've got three sets of tyres in the loft.

not_a_robot
not_a_robot November 19, 2026 at 10:31 AM

The The upholstery shop idea is the best one though. Local places don't advertise but they'll often take small jobs. Just walk in with the seat and ask.

Post a reply

Find Your
Perfect Scooter šŸ”„